DANUSER 21006

Request Quote
Hi, my name is and I would like to get more information on this DANUSER 21006 .
I can be reached by email at or by phone at
.


Part #: 21006
Mfg: DANUSER
Category: TRACTOR ATTACHMENTS
Sub-Category: POST DRIVER LOADER SSL MOUNT
Industry: AGRICULTURAL
Machine Size: SSL MOUNT
Attachment Size: MAX POST WIDTH 8.5" X 9.25"
List Price: $7,310.00 (not including Freight)
Shipping: $425.00
Inventory: 21006: 0 AFS / 0 QOH / 0 QOO / ISBF
DANUSER LM40**NO TILT**NO GRAPPLE**NO ADDITIONAL WEIGHT


Danuser Hammer

Model LM40 has a 40” drop hammer design with up to 35 strokes per minute. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the tractor seat. Tilt option allows up to 20° in each direction. The hammer weight is 300 lbs. from the factory. Additional weight can be added for a total of 500 lbs. The unit also has an integrated post puller to be used with log chain.

NOTE: If post/pipe diameter is 5? or smaller and you have a helper, PN 21395 Donut Strike Plate must be purchased separately. If driving with one person, PN 21212 Horseshoe Strike Plate is a better option.

  • Post Dimensions

    T-post to Railroad tie

  • Impact Force

    49,000 lb.

  • Impact Energy

    1,025 ft.-lb.

  • Length of Stroke (inches)

    40"

  • Hammer Weight

    300 lb.

  • Strokes per Minute

    35

  • Overall Length (inches)

    46"

  • Overall Width (inches)

    25"

  • Overall Height (inches)

    64"

  • Machine Weight

    920 lb.

  • Hydraulic Requirements

    1,500 - 3,000 PSI; 12 - 30 GPM

  • Maximum Post Width (inches)

    8.5" x 9.25"

  • Tractor Requirements

    75 HP Minimum

Post Dimensions:T-post to RR Tie
Impact Force:82,000 lbs.
Length of Stroke:40
Hammer Weight:300
Strokes per Minute:35

 

Model LM40Model LM40 w/ Grapple
Overall Length45.5"
Overall Width25"
Overall Height64"
Tilt (side-side)N/A
Machine Weight946 lbs (1,146 lbs w/ additional weight)986 lbs (1,186 lbs w/ additional weight)
Hammer Weight300 LBS (500 LBS MAX)
Length of Stroke40"
Max. Strokes per Minute35
Hydraulic Requirements1500-3000 PSI 
*12-30 GPM
Tractor Requirements75 HP minimum
Maximum Post Width8.5" x 9.25"
Impact Force82,000 lbs @ 500 lb weight
Impact Energy1,025 ft-lbs @300 lb weight;
1,709 ft-lbs @ 500 lb weight

*Hammer will still operate on machines with less than 12 GPM with fewer strokes per minute.





















Aux Wiring Harnesses

  • Add An Optional Wiring Harness To Allow The Optional Tilt Function To Operate From The Vehicle Joystick Controls. Wiring Harnesses Replace The Cigarette Lighter Plug On The Hammer Standard Harness. 
  • All Wiring Harnesses Are 12? In Length 
  • ** Requires Connector Contacts Be Installed In A Switchable +12V Pin Location & Ground Pin Location. Mapping Of Tractor Connector Pins Required.

 











































 






















    Facebook

    Members of EMDA
    2025 © Implement Sales, LLC
    1141 Rosewood Cir. Monroe, GA 30655
    All Rights Reserved
    Privacy Policy
    Call 770-908-9439