All Equipment

Rotating Bale Hand. Rated at 2,200 lbs. Handles 4-6-ft. round bales, wrapped / unwrapped. Both arms open to clamp bale. Rotates 110 degrees. Opt. interfacing brackets are required. Hydraulic cylinder. LESS HOSES AND FITTINGS **MUST SPECIFY MOUNT**solenoid kit for power units equipped with single auxiliary valve includes hoses & couplers (Item #832964)

Rotating Bale Hand, "universal" Skid Steer mount. Unit will handle round bales from 4-6-ft up to 2,200 lbs. wrapped/unwrapped. Rotates 110 degrees. Includes cylinder (less hoses)solenoid kit for power units equipped with single auxiliary valve includes hoses & couplers (Item #832379)

Designed to pick-up two 4' x 4' x 8' or three 3' x 3' x 8' rectangular bales, or a single bale in its’ retracted position. Four bolt-in spears (useable length 40.5”) support the bales on the bottom with 2- upper balance spears. Frame is 72” wide x 84” high, center is 46” wide. In its’ retracted positon frame is 72” wide x 50” high, center is 46” wide.

Design for Skid Steers and tractor loaders equipped with “universal” skid steer quick attach system Designed to pick-up two 4' x 4' x 8' or three 3' x 3' x 8' rectangular bales, or a single bale in its’ retracted position. Four bolt-in spears (useable length 40.5”) support the bales on the bottom with 2- upper balance spears. Frame is 72” wide x 84” high, center is 46” wide. In its’ retracted positon frame is 72” wide x 50” high, center is 46” wide

Designed to pick-up two 4' x 4' x 8' or three 3' x 3' x 8' rectangular bales, or a single bale in its’ retracted position. Four bolt-in spears (useable length 40.5”) support the bales on the bottom with 2- upper balance spears. Frame is 72” wide x 84” high, center is 46” wide. In its’ retracted positon frame is 72” wide x 50” high, center is 46” wide.

Designed to pick-up two 4' x 4' x 8' or three 3' x 3' x 8' rectangular bales, or a single bale in its’ retracted position. Four bolt-in spears (useable length 40.5”) support the bales on the bottom with 2- upper balance spears. Frame is 72” wide x 84” high, center is 46” wide. In its’ retracted positon frame is 72” wide x 50” high, center is 46” wide.

Designed to pick-up two 4' x 4' x 8' or three 3' x 3' x 8' rectangular bales, or a single bale in its’ retracted position. Four bolt-in spears (useable length 40.5”) support the bales on the bottom with 2- upper balance spears. Frame is 72” wide x 84” high, center is 46” wide. In its’ retracted positon frame is 72” wide x 50” high, center is 46” wide.

Sub-compact pallet forks rated at 1,250 lbs. with1"x3"X 36" long forks. "universal" skid steer mount

Designed for mini skid steers / compact tool carriers. Features forks that are 1"x3"x 36" w/ universal mount. Rated at 1200 lbs.**DOES NOT FIT KUBOTA**

Pallet forks for JD 200, 200cx, H120, H130 loader Rated 1,250 lbs. Class I forks 1"x3"x36"

Designed for Bobcat MT-series (MT-50,MT-52, MT-55) & S70 plus Gehl 1640E. Rated at 1,262.50 lbs. forks are 1"x3"x36"

Pallet forks for JD 200, 200cx, H120, H130 loader Rated 1,250 lbs. Class I forks 1.18"x3"x42"

Sub-compact pallet forks rated at 1,250 lbs. with 1.18"x3"X 42" long forks. "universal" skid steer mount

Skid Steer Pallet Forks with step-through backstop. Rated at 10,000 lbs. 48” x 2” x 5” solid forks

Skid Steer Pallet Forks step-through backstop. Rated 10,000 lbs. 60” x 2” x 5” solid forks

Skid Steer Pallet Forks step-through backstop. Rated 10,000 lbs. 72” x 2” x 5” solid forks

Euro / Global pallet forks. Rated at 5,500 lbs. Forks are 60"x1.57"x4"

3-pt Dual Bale Handler for round bales. Rated at 6,000 lbs. Transport two round bales at once. Cat. I/II quick hitch compatible

Designed to transport two round bales at once. Frame size 76" x 24" with 4 bolt-in spears with 42" useable length. Rated at 6,000 lbs.

Transport two round bales at once unit is 76" x 24" rated at 6,000 lbs. Requires that brackets be welded to the unit. **MUST SPECIFY LOADER MOUNT**

Bale squeeze for large rectangular bales, wrapped / unwrapped. Skid Steer mount. Opens 48"-96" for bales up to 3,400 lbs. Includes cylinders, hoses & couplers included.

Euro/Global mount, both arns open on this large bale squeeze. Opens 48"-96" for bales up to 3,400 lbs. Includes cylinders (less hoses & couplers)

Designed for mini skid steer / compact tool carrier to allow them to use standard "universal" skid steer attachments

Interfaces with "Universal" skid steer attach allowing use of Euro/Global attachments

Interfaces with JD 400/525 series loaders allowing use of Euro/Global attachments

Interfaces with JD 600/700 series loaders allowing use of Euro/Global attachments

Converts standard tractor loaders with pin on buckets to accept Euro/Global attachments. Paired with 830345 pin-on brackets with 1" pins.

Weld-on plate for JD 200X, 200CX, H120, H130, H160, D120, D160 , 315 series loaders. Simply welds to any existing attachment to convert to JD 315/400 interface. Plate is 49.38” x 19.34” with steel cast hooks & welded locking pins

Weld-on plate for JD 400/ 525 series loaders. Simply welds to any existing attachment to convert to JD 400/ 500 interface. Plate is 49.38” x 22.69” with steel cast hooks & welded locking pins

Interfaces with "Universal" Skid Steer attach, allowing use of JD 400 attachments. Max Cap 4,000 lbs.

Interfaces with Cat. I or Cat II 3-pt hitches (quick hitch compatible) allows use of skid steer type attachments

"Universal: skid steer to Cat. I quick hitch, allows the use of Cat. I non-PTO powered implements on a skid steer

"Universal: skid steer to Cat. II quick hitch, allows the use of Cat. II non-PTO powered implements on a skid steer

Interfaces with Mahindra Emax 22L, 25L and TYM TX-25 with single center lift cylinder, allows use of skid steer attachments (shipped less pins)

Interfaces with Mahindra Max 26L to allow the use of skid steer attachments (shipped less pins) Max. Cap. 1,200 lbs.

Interfaces with Kioti SL2430.50 with single center lift cylinder, allows use of skid steer attachments (shipped less pins)

Interfaces with Massey Ferguson DL95 to allow the use of skid steer attachments (shipped less pins) Max. Cap. 1,200 lbs.

Interfaces with Kubota LA243 with single center lift cylinder, allows use of skid steer attachments (shipped less pins)

Interfaces with JD 200X, 200CX, H120, H130, H160, D120, D160 to allow the use of Skid Steer Attachments Max. Cap. 1,200 lbs.

Interfaces w/ McCormick 125C, Branson SL100, Kioti KL2535.50, LS LL2101 allowing use of skid steer attachments, includes 25mmx127mm greaseable pins

Interfaces with Mahindra Max 24L to allow the use of skid steer attachments (shipped less pins) Max. Cap. 1,200 lbs.

Interfaces w/ Kubota LA504, LA534 allowing use of skid steer attachments (shipped less pins)

Interfaces w/ Kubota LA524, LA551.25 allowing use of skid steer attachments (shipped less pins)

Interfaces with loaders used on Versatile 160, 256, 276 & Ford 9030 Bidirectional to allow the use of skid steer attachments

Interfaces with loaders used on Versatile 160, 256, 276 & Ford 9030 Bidirectional to allow the use of Euro / Global attachments

Euro/Global to John Deere 500 Series Interfaces with Euro/Global agricultural loaders allowing the use of John Deere 500 Series Style attachments that use the hook

Interfaces with loaders that use the "universal" skid steer quick attach to allow the use of John Deere 500 Series Style attachments that use the hook & pin attaching system, with a ctr. / ctr. distance between the hook and the pin of 17.60-inches.

Interfaces w/ Westendorf TA-20 series to skid steer. Center to center loader arm distance of 39 inches

Interfaces with NH 82LB, 84LB, 7614 on TV140, TV145, TV6070 to allow use of skid steer attachments

Interfaces with NH 82LB, 84LB, 7614 on TV140, TV145, TV6070 to allow use of Euro / Global attachments